BPNYC ZERO Halliburton Eurorack Modular Travel Case 7U 96hp USB-C Power, Ribbon Sensor

BPNYC ZERO Halliburton Eurorack Modular Travel Case 7U 96hp USB-C Power, Ribbon Sensor

販売価格: 268,110円 [通常販売価格: 297,900円]

重さ: 20lb

数量:

商品詳細

BPNYC ZERO Halliburton Eurorack Modular Travel Case 7U 96hp (NOW with)USB-C Power, Ribbon Sensor

*これら各ケースは毎回一点物なため実物はこのページの写真とわずかに違うことにご注意ください!

一点物のユーロラックモジュラーケース!

私は以前、ニューヨークの古着屋で働いていました。ある日、お客さんがヴィンテージのハリバートンのトラベルケースを2つ持ってきました。その時初めて、このクールなトラベルケースのことを知りました。
私はこの宇宙的・スパイ映画風で耐久性のあるデザインとアルミ素材にすぐに惚れ込んでしまいました。それ以来、ずっと自分でも欲しいと思っていたのですが、なぜか機会がありませんでした。

Eurorackモジュールの世界では、ケースはモジュールの電源供給とモジュールの保護に不可欠です。
そこで、私は、美しく、オリジナリティがあり、かつ丈夫な、世界にひとつだけのケースを作りたいと思いました。Vintage Halliburtonのケースは、そんな私の要望をすべて叶えてくれるものでした。実際、このケースはあらゆる種類の旅行でのタフなコンディションに耐えられるように設計されていますし、その上、見た目もクールです。この宇宙的なデザインで、あなたのモジュールを保護し、ショーで目立つことも間違いないでしょう。ビートルズがこのケースで旅をしている写真や、アポロ11号の宇宙飛行士が月の石をハリバートンのケースに入れて地球に持ち帰った写真もありますね!

ハリバートンのケースは、様々なシーンを想定して作られています。BPNYCでは、これらのケースをEurorack Modular Casesに変換して、ユニークなケースを作りたいと考えています。
実はDon Buchlaが昔、MUSIC EASELでハリバートンのケースを青く塗って使っていたのは知ってますか?

ユニークなケースを作るには、次のような手順があります。

1.オークションなどでEurorackに適したサイズのケースを見つける。
2.不要なパーツを取り除き、きれいにする。(例えば、ケースの中にブリーフケースのフォルダーなどが入っていたり、外側にも不必要なパーツがあったりします)
3.上下のケースをつなぐ長いヒンジを外し、取り外し可能なヒンジを付ける(ケース上部が外れるように)。また、新しいヒンジを傷つけないように、4つの足をすべてオリジナルよりも少し背の高くより丈夫でオシャレなものに交換します。
(*このケースは、とても珍しくすでにリムーバブルトップが装着されているため、この処置は不要でした。)
4.eurorackの電源バス、レール、ショックマウントを取り付ける。

*ケースは1つ1つ状態が違うので、それぞれ微妙に違う作業が必要になります...。
*その他にもケースを美しく、正しく機能させるために、細かい作業がたくさんあります。

どのケースもすでにヴィンテージのユーズドコンディションなので、細かいキズやシミなどはありますが、それもこのケースのカッコイイ要因のひとつです。使っているうちにさらに傷がつくと貫禄がまた増します!

This case is powered by Konstant Lab SeventyPWR SET – 70W Eurorack power supply
POWER: 70W
OUTPUT: +12V / 2500mA, -12V / 2500mA, +5V / 2000mA
TYPICAL OUTPUT RIPPLE NOISE: under 17mVpp / 20MHz BW

NUMBER OF HEADERS:Filtered bus board #1 option – Total 36 angled output shrouded headers

OTHER FEATURES:Overvoltage protection on PSU also on each bus board – keep your modules safe
High quality shock resistant "Push to Connect" terminals
Unique LC filtering circuits
LEDs indicate presence of voltage and voltage drop
Easy for montage and connection
Meanwell power brick with worldwide input range

BUS BOARD VERSION:Filtered bus board #1 – angled connectors


The USB-C PWR inlet transforms how you power your Eurorack system by integrating USB-C Power Delivery technology with comprehensive voltage monitoring and an additional USB-A port for accessories. This compact 70x40mm panel delivers up to 100W (20V/5A) of stable power for your modular synth whether in your studio or anywhere inspiration strikes, requiring only a compatible USB-C power bank or charger with 20V output capability.

Konstant Lab USB-C PWR inlet
USB-C PWR inlet – Studio quality power with anywhere versatility.

In today’s world of portable studios and streamlined setups, power solutions need to be as adaptable and efficient as your creative process. Introducing the USB-C PWR inlet from Konstant Lab, a meticulously engineered power panel designed to seamlessly integrate modern USB-C Power Delivery into the realm of Eurorack modular synthesis. This innovative panel not only simplifies your power setup but also empowers you to create music anywhere – in your studio or on the go with a suitable power bank – untethered from traditional power constraints. Whether you’re performing live, composing on the go, or simply optimizing your studio space, the USB-C PWR inlet offers a practical solution for powering your modular synthesizer wherever inspiration strikes.

Features:

USB-C Power Delivery Input: Embrace the convenience of universal USB-C Power Delivery. This panel is powered via a USB-C connector and is designed to support the USB Power Delivery protocol, ensuring efficient and reliable power transfer. To operate correctly, it requires a USB-C power bank or charger that supports 20V output.
20V Output for Synthesizer Power Supplies: The panel expertly generates a stable 20V voltage, making it fully compatible with Konstant Lab power supplies and other Eurorack power solutions designed to accept a 20V input voltage. It boasts a maximum power output of 100W (20V / 5A), providing ample power for even larger modular systems.
5V USB-A Output Port: A front-panel integrated 5V USB-A connector allows for convenient powering of external USB devices. This is perfect for sequencers, MIDI controllers, USB lamps or other USB-powered accessories directly from your modular system.
Intuitive LED Status Indication: Stay informed at a glance with four integrated LEDs that provide clear visual feedback on your power system’s status:
Input LED: Illuminates to indicate a successful USB-C connection and communication with the connected charger. This confirms that your USB-C power source is properly connected and providing power to the panel.
+12V, -12V, +5V LEDs: These three LEDs are dedicated to monitoring the critical power rails for your modular synthesizer. When all three LEDs are lit, it signifies that all voltage rails are functioning correctly. Should any voltage rail drop by more than 1V, the corresponding LED will switch off, immediately alerting you to a potential issue.
Integrated ON/OFF Switch: A conveniently placed ON/OFF switch on the panel provides straightforward control over your entire modular system’s power, allowing for quick and easy system activation and shutdown.
Compact Form Factor & Easy Installation: The panel’s compact dimensions (70x40mm) are designed to save valuable space within your modular case. Output connections are made via two 4.8mm Faston connectors. For user convenience, cables with pre-crimped Faston connectors are included in the package, ensuring a hassle-free connection to your power supply.
Voltage Monitoring Feedback: For precise voltage indication of the +12V, -12V, and +5V rails, the output of your power supply is fed back into the panel using a standard 16-16 pin ribbon cable. This cable is included in the package, completing the feedback loop for accurate voltage monitoring.
Broad Compatibility: While designed to perfectly complement Konstant Lab power supplies, the USB-C PWR inlet is also compatible with a wide range of other Eurorack power supplies that support a 20V input voltage, offering versatility for various modular setups.
Package Contents: USB-C PWR Panel, cables with Faston connectors, 16-16 pin ribbon cable, screws.

Disclaimer: Please note that an external USB-C charger or power bank is not included in the basic package. USB-C charger is sold as option or separately. The USB-C charger or power bank used must support the USB Power Delivery protocol with a 20V output. It must also have sufficient power output to adequately power your synthesizer, depending on its size and module consumption. We recommend to use Anker 737 GaNPrime 140W PD 24000mAh Power Bank with our USB-C PWR inlet.



Additional information
Weight 70 g
Dimensions 7 × 4 × 5 cm
POWER
Deppends on USB-C charger / power bank on input. Max. is 100W (20V / 5A)

OUTPUT
20VDC / 5A max.

OUTPUT terminals
Faston 4.8mm (crimped faston wires attached)

OTHER FEATURES
Active power switch
USB-A 5V output
LEDs indicate presence of voltage and voltage drop (PWR checker functionality)
Easy for montage and connection

PANEL DIMENSION
70mm x 40 mm thickness 1.5mm




他の写真


*** お問い合わせ&予約受付中 ***
当店で扱っている各商品は大量生産ではありません。 メーカーにも在庫に限りがあります...
確実に欲しい商品に関しては早めに予約/在庫確認する事をおすすめします...
尚、お取り寄せをしなければいけない場合の納期は大抵3~5週間位と思っていただければ幸いです。