Erica Synths Fusion VCF v2

24dB/12dB Fusion VCF is our take on the four pole lowpass filters. Each side of double triode drives signal between 2nd and 3rd stage of the filter, while germanium diodes are used to limit output signal.

Result ultimately deep sounding VCF with unique character. Ingenious resonance volume compensation circuit and filter slope selection make this filter ideal for live performances. Bonus feature – 3 input mixer with dedicated mixer output. Try patching the MIX OUT into one of mixer inputs, increase input level until the mixer goes into self-oscillation and use the filter to alter the drone, you have! The Fusion VCF is an instrument on it’s own!


4 pole lowpass resonant VCF with tube drive between stages
Three input signal mixer
Selectable 24db/12dB filter slope
Signal drop compensation, when resonance is increased
Germanium diode based output signal limiter
The Erica Synths Fusion series modules are designed combining vacuum tubes and semiconductors therefore they bring warm, powerful sound and overdrive possibilities of vacuum tubes into your modular system. Erica Fusion series consist of range of modules used in sound shaping circuit – VCO, Mixer, real Ringmodulator using audio transformers and germanium diode ring, VCF, VCA and Analogue Delay/Flanger.

Technical specifications:
Audio input level
up to 20V ptp

CV input level (full cutoff span):
-10V - +10V

Panel width

Module depth

Power supply
bipolar +-12V, eurorack standard and/or Erica Synths 6VAC PSU

Tube heater PSU configuration
35mA@+12V, 20mA@-12V, 300mA@6VAC

Eurorack PSU configuration
35mA@+12V, 170mA@-12V
(NB – start-up power consumption for few seconds is -250mA)


* Erica Synths 各商品はお取り寄せのため納期は約1ヶ月になります事をご了承ください...

Erica Synths Fusion VCF v2

販売価格: 46,900円

重さ: 1lb


*** お問い合わせ&予約受付中 ***
当店で扱っている各商品は大量生産ではありません。 メーカーにも在庫に限りがあります...